DMC壓接鉗AF8 M22520/1-01描述
DMC AF8符合MILDTL-22520/1標準，在指定范圍(12到26 AWG)內，它的應用范圍幾乎是無限的。超過一千個轉塔頭可用使工具框架適應特定軍用或?qū)Ｓ薪佑|/電線組合。 AF8標準的8壓印壓縮確保了每個閉合接觸的絕對拉伸強度?？筛鶕?jù)要求提供特殊的縮進配置和測量。
為了正常操作，工具必須與以下可選附件之一配合使用：符合軍用標準或非軍用標準的轉塔頭（TH-XXX零件號系列），符合軍用標準或非軍用標準的定位器（TP-XXX部件號系列），或可調節頭（部件號UH2-5）。 這可以簡單地通過將頭部定位在鍵控位置，并通過擰緊作為頭部的一部分提供的內六角螺釘來完成.
精密棘輪控制工具在手柄運動的兩個方向循環。這樣每次都能保證相同的精確壓接。就像每個工作崗位都有一個質量控制檢查員。
壓接深度由工具架上的8位選擇旋鈕控制。操作員只需撥動所使用導線所需的步驟即可。可以使用鎖定銷或安全線來確保此設置。
精心的設計實現了絕對最大的機械優勢，工具重量輕，有助于減輕操作員疲勞
所有轉塔頭和定位器都貼有永久數據板。該板列出了特定的接觸部件號，相應的位置顏色代碼（用于3個位置的轉塔頭），以及所使用的導線尺寸的建議選擇器深度設置。
可調節頭（P/ N UH2-5）非常適合實驗室工作和原型生產應用。該頭部以與上述相同的方式連接。所選擇的觸點通過工具框架與頭部相對的一側的入口孔插入。然后旋轉高度調節螺釘，直到觸頭處于適當?shù)奈恢眠M行壓接。螺釘可以用提供的鎖緊螺母固定。需要進行一些測試以確定接觸/電線組合的最佳選擇器設置。
AF8大約9?"*2?"*1?",重15 oz。
The DMC AF8, qualified to MIL- DTL-22520/1*, has virtually limitless application within the specified wire range of 12 through 26 AWG. Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The 8 impression crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact.
Special indent configurations and gaging are available upon request.
For proper operation, the tool must be mated with one of the following optional accessories: a military standard or non-military turret head (TH-XXX Part No. Series), a military standard or non-military positioner (TP-XXX Part No. Series), or an adjustable head (Part No. UH2-5). This is done simply by orienting the head in the keyed position, and by tightening the hex socket screws provided as part of the head.
The precision ratchet controls cycling of the tool in both directions of handle movement. This assures the same accurate crimp every time. It’s like having a quality control inspector at every work station.
Positive crimp depth is controlled by an 8 position selector knob
conveniently located on the tool frame. The operator simply dials the desired step for the wire being used. This setting can be secured by use of a locking pin or safety wire.
The carefully engineered design achieves the absolute maximum mechanical advantage and the tool’s light weight helps minimize operator fatigue.
A permanent dataplate is affixed to all turret heads and positioners. This plate lists specific contact part numbers, the corresponding position color code (for 3 position turret heads),and suggested selector depth settings for the wire size being used.
The adjustable head (P/N UH2-5)is ideally suited for lab work and prototype production applications. This head is attached in the same manner as explained above. The selected contact is inserted through the entry hole on the opposite side of the tool frame from the head. The height adjusting screw is then rotated until the contact is in the proper position for crimping. The screw can be secured with the locknut provided. Some testing will be necessary to determine the optimum selector setting for your contact/wire combination.
The AF8 is approximately 93?4" x 21?2" x 11?4" and weighs 15 oz.
愛澤工業(IZE INDUSTRIES)特價經銷、常用DMC AF8壓接鉗套件型號：
DMC壓接鉗帶轉塔頭AF8-TH163
DMC壓接鉗帶轉塔頭AF8-TH18
DMC壓接鉗帶轉塔頭AF8-TH185
DMC壓接鉗帶轉塔頭AF8-TH1A
DMC壓接鉗帶轉塔頭AF8-TH270
DMC壓接鉗帶轉塔頭AF8-TH4
DMC壓接鉗帶轉塔頭AF8-TH402
DMC壓接鉗帶轉塔頭AF8-TP465
DMC壓接鉗帶轉塔頭AF8-TP529
DMC壓接鉗帶轉塔頭AF8-TP585
DMC壓接鉗帶轉塔頭AF8-TP687
DMC壓接鉗M22520/1-01 AF8
DMC壓接鉗AF8M22520/1-02 TH1A
DMC定位器M22520/1-03 H4
DMC定位器M22520/1-04 TH163
DMC定位器M22520/1-05 UH2-5
DMC定位器M22520/1-06 TP45
DMC定位器M22520/1-07 TP85
DMC定位器M22520/1-08 TH199S
DMC定位器M22520/1-09 TP360
DMC定位器M22520/1-10 TP365
DMC定位器M22520/1-11 TP465
DMC定位器M22520/1-12 TH270
DMC定位器M22520/1-13 TH285
DMC定位器M22520/1-14 TH286
DMC定位器M22520/1-15 TP485
DMC定位器M22520/1-16 TP513
DMC定位器M22520/1-17 TP651
DMC定位器M22520/3-1 G125
DMC帶所有軍用定位器和轉塔頭的AF8/AFM8工具套件DMC1119(M22520/1)
DMC帶TH1A和G125工具套件的AF8DMC180
DMC用于電氣連接器和接線系統的AF8（M22520/1-01）工具套件DMC1186
DMC用于電氣連接器和接線系統的AF8工具套件DMC283
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
愛澤工業為用戶提供咨詢、資料上門、輔助選型，售后安裝服務，操作人員免費培訓等服務。
歡迎致電索取樣本資料和產品信息。
如果有任何關于DMC壓接鉗AF8 M22520/1-01的疑問，請隨時致電我們，愛澤工業（021-31006702）。我們將盡全力解決您的問題。
有關于DMC壓接鉗AF8 M22520/1-01更詳細的信息或者DMC相關產品，請致電愛澤工業。
If you have any question for DMC AF8 M22520/1-01 , please feel free to dial 0086-21-3100 6702 or browse our website: www.dljtgw.com.
DMC壓接鉗AF8 M22520/1-01產品描述
